![]() The next time you will be reminded to change your BMW brakes is 25000 miles for front and 31000 for rear brakes, even though these intervals may vary between models.Īlternative Method to Reset BMW Brake Light The miles should change to -–, indicating the reset was performed successfully.Continue holding the ODO reset button until the brake light disappears. Once the word reset displays below the brake symbol, quickly release the button and press it again.When the symbol for the desired brakes is displayed on the screen, press and hold the ODO reset until you see the word RESET below the symbol.Depending on which sensor you replaced and would like to reset. Press the ODO reset button a few times until you see the front or rear brakes symbol. ![]() Continue holding the ODO reset button pressed until the next symbol comes up. First, a yellow triangle will show on the dash. ![]() ![]() Press and hold the ODO reset button for about five seconds.Make sure time is shown at the center of the instrument cluster.If your BMW has a START button, press it without pressing the brake pedal. Turn on the ignition but do not start the car.Brake pads must have at least 80% of life remaining.BMW brake light reset procedure can be performed for front or rear brakes.Sometimes, you may have to perform the BMW brake reset procedure more than once.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |